Cal Flame BBQ08954P Burner User Manual


 
Appendix
19
Cal Flame Side Burners
LTR50001082, Rev. B
www.calspas.com
Troubleshooting
Problem: Smell of gas is present
Solution: Check for loose connections in the gas line. Perform a
leak test following the procedure described in this man-
ual.
Problem: Burner does not ignite
Solution: Check the position of the sparker tip. It should be point-
ing forward towards the front of the burner.
Make sure there is a blue spark at the electrode tip
to the burner.
Make sure the igniter wire is connected rmly to the
valve ignition device and the electrode.
Make sure the valve orice is free of any debris,
dust or grease.
If there is no spark at all, replace the electrode or
igniter wire.
Note: Turn off the gas at the source while troubleshoot-
ing.
Problem: Obstruction in the gas line
Solution: Remove the fuel line from side burner. (Do not smoke
or perform any maintenance in the vicinity of an open
ame.) Open the gas valve for one second to blow out
any debris. Close off the gas valve and reconnect the
fuel line securely.
Problem: Yellow Flame
Solution: Once the entire burner is operating, check the ame
color to be sure that it is mostly blue. Some yellow at
the tips may be present due to impurities in the fuel. If
the ame is golden or yellow in color, the reason could
be oil lm, residue from boil over, or other foreign mat-
ter on the burner.
Appendix