Cadillac 2010 Home Safety Product User Manual


 
Black plate (104,1)
Cadillac SRX Owner Manual - 2010
9-104 Vehicle Care
8. Now connect the black
negative () cable to the
negative () terminal of the good
battery. Use a remote
negative () terminal if the
vehicle has one.
Do not let the other end touch
anything until the next step. The
other end of the negative ()
cable does not go to the dead
battery. It goes to a heavy,
unpainted metal engine part or
to a remote negative () terminal
on the vehicle with the dead
battery.
9. Connect the other end of the
negative () cable away from the
dead battery, but not near
engine parts that move. The
electrical connection is just as
good there, and the chance of
sparks getting back to the
battery is much less.
Your vehicle has a remote ()
terminal for this purpose.
10. Now start the vehicle with the
good battery and run the
engine for a while.
11. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it
probably needs service.
Notice: If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be
covered by the vehicle warranty.
Always connect and remove the
jumper cables in the correct
order, making sure that the
cables do not touch each other or
other metal.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine
Part or Remote Negative ()
Terminal
B. Good Battery or Remote
Positive (+) and Remote
Negative () Terminals
C. Dead Battery or Remote
Positive (+) Terminal