Filter
Top Products
MAINTENANCE
WARNING:
Make sure the weapon has been “cleared” and on SAFE before mounting or
dismounting the XT-120 by following the instruction manual for your firearm.
Allow bulb assembly to completely cool before servicing.
1. Clean the XT-120 with mild, soapy water and rinse thoroughly with clean
water to eliminate residue. Dry with a soft cloth. Clean anytime after the
XT-120 becomes dirty or after exposure to salt water.
2. Clean the aiming and illumination beam windows by wiping with a soft cloth
moistened with clean water, alcohol or window cleaner. To facilitate clean-up
of the flashlight lens, rub a small amount of oil or lubricating solvent on the
exterior lens ONLY prior to shooting.
3. Clean the electrical contacts with cotton swabs dipped in alcohol. For
heavier build-up, use a pencil eraser.
4. For replacement bulbs (Part #626080), contact your dealer or contact Burris
for the location of your nearest distributor.
19