Filter
Top Products
4. Note the raised markings indicating battery orientation. Hold the
XT-120 with mounting rails on top and the battery receptacle facing
you. Insert a battery on the left side with the negative end first. Insert
the other battery on the right side with the positive end first.
5. Place the bottom lip of the backplate into the bottom groove of the
battery compartment and pivot upward until the tab engages into
the retaining slot with an audible “click.”
6. Ensure proper functioning by manipulating the mode selection
switch and rocker switch to make sure that the light turns “ON.” If
not, make sure that the backplate is installed properly and if the light
still does not operate, remove the backplate and make sure that the
batteries are installed correctly.
CAUTION:
We recommend that you DO NOT store the XT-120 while batteries
are installed.
18