Filter
Top Products
BURNER FLAME PATTERN
Figure 18 shows a correct burner flame pattern. Figure 19 shows an incorrect burner flame
pattern.
NOTE: When using the heater the first time, the logs will emit a paper like odor for about one
hour.
If burner flame pattern is incorrect, as shown in Figure 19:
*turn heater OFF (see “To Turn Off Gas to Appliance”, page 28.
*see “Troubleshooting”, pages 35 through 39.
CORRECT FLAME PATTERN
AT HIGH POSITION
Figure 15 - Correct Burner Flame Pattern
INCORRECT FLAME PATTERN
AT HIGH POSITION
Figure 16 - Incorrect Burner Flame Pattern
18
19
27