Filter
Top Products
9
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
5 2 4 J E 2 5 A 0 0 0 A 2 0 A A A
_____________
Model Type
Packaging
524J = Bryant Fan Coil
Puronr R---410A Refrigerant
A=Standard
Type of Coil
Service Options
B = High Capacity DX Coil
H = DX Coil for Heat Pump Duty
A = Standard DX Coil
A=None
B = Painted Cabinet
Indoor Fan Options
1 = Fan Drive and Motor - Low / Motor Efficency - Standard
2 = Fan Drive and Motor - Med / Motor Efficency - Standard
Not Used
A = Not Used
Not Used
0=Not Used
Not Used
0 = Not Used
Coil Options
A=Al/Cu
Not Used
0=Not Used
Not Used
0 = Not Used
3 = Fan Drive and Motor - High / Motor Efficency - Standard
Voltage
E = 460/3/60
P = 208/ 230/3/60
T = 575/3/60
____
Nominal Tonnage
25 = 20 Tons
28 = 25 Tons
30 = 30 Tons
C10837
Fig. 3 -- Model Number Nomenclature
SETANGISEDNOITISOP
)radnelac lacsif( erutcafunam fo keeW1−2
)ASU ,saxeT ,PTE = G( noitacol gnirutcafunaM5
rebmun laitneuqeS6−10
12345678910
2610G12345
POSITION NUMBER
TYPICAL
Year of manufacture (“10” = 2010)3−4
C!0725
Fig. 4 -- Serial Number Nomenclature
TXV COIL
REMOVE FOAM BLOCK
LEGEND
TXV — Thermostatic Expansion Valve
C10683
Fig. 5 -- Foam Block Location
Unit Positioning -- The unit can be mounted on the floor
for vertical application with return air entering the face of
the unit and supply air discharging vertically through the
top of the unit. The unit can also be applied in a
horizontal arrangement with return air entering
horizontally and the supply air discharging horizontally.
When applying the unit in a horizontal arrangement,
ensure the condensate drain pan is located at the bottom
center of the unit for adequate condensate disposal. See
Fig. 6 for condensate connections for each unit position.
LEGEND
Accessory Line
Alternate Air Intake and Discharge
Air Intake and Discharge
Note: Maintain recommended clearances
per Fig. 1 and Fig. 2
PLUG
PLUG
CONDENSATE
DRAIN
C10684
Fig. 6 -- Typical Unit Positioning
524J