Bryant 44760 Thermostat User Manual


 
16
16
PROGRAMMING
Option Menu
Your thermostat has many settings that can be adjusted to fit your system and preferences.
Press to enter the Option Menu and to change to the next option selection.
Press at any time to return to normal mode.
Fahrenheit or Celsius (F°/C°) selection
or to change the thermostat display between
Fahrenheit and Celsius.
12 Hr or 24 Hr. Clock selection
or to change the time format display between
12 hour (AM / PM) and 24 hour (military).
option
ret-clear
option
1
option
2
Temp
Clock
41652_model44760_web.pmd
17
Stage 1 SPAN selection
or to change the SPAN setting to 1, 2, or 3. The
factory setting is 2. Setting 1 will cause shorter cycle times. Setting 3
will cause longer cycle times.
Auto Recovery selection
or to enable “YES” or disable “NO” the Auto
Recovery Mode. The factory setting is “YES.”
To change between Heat or Cool recovery modes.
NOTE:
Auto Recovery is one of the ENERGY STAR
®
features of this thermostat. Refer to the Auto Recovery section on
pages 45-46 for more information.
LCD Contrast adjustment
or to change the LCD contrast between 0 and 9.
Lower numbers lighten the display. Higher numbers darken the display.
The factory setting is 5.
option
3
Span Stg1
system
option
4
Recovery
System
option
5
LCD