Filter
Top Products
Condensate Transfer Stations
6 to 60 GPM pump capacities
10 to 60 PSI discharge pressures
8 to 50 gallon receivers
In most heating systems, condensate, and sometimes
steam, is trapped out of heaters, kettles, hot presses,
molds, absorbers, and other equipment and drained to
a return unit having given up some of its heat in the
process. If a trap malfunctions, the condensate can be
passed to the return unit at a much higher temperature
causing the return unit to fail. When using Bryan
Condensate Transfer Stations as the return unit, this
problem is overcome because they are designed to
eliminate cavitation at high temperatures. In addition,
Bryan Condensate Transfer Stations are designed to
handle the higher load placed on them during cold
starts and are supplied with reliable pumps that are
designed to handle hotter water and develop higher
pressures at lower speeds.
Bryan Condensate Transfer Stations are ideal for
remote or non-accessible locations where unattended,
dependable performance is essential.
The Bryan horizontal boiler feed system is a conven-
tional stand-mounted feed system that is completely
packaged, but is also flexible to meet each customers
specific needs.
Features
• Atmospheric tank built from heavy ¼" minimum
steel thickness
• Tank sizes from 50 to 500 gallons
• Factory packaged for ease of installation
• Packages based on 1 gallon storage per
1 BHP minimum
• Available with single or multiple pump packages
• Pumps mounted in front of tank for ease of
maintenance and replacement
• TEFC pump motors and NEMA 12 enclosures
are standard
• Heavy duty stand with pump platform
• Integral steam preheater optional
Horizontal Boiler Feed Systems
Capacities to 500 boiler HP
15 through 250 PSI boilers
Save energy and reduce
2
Model B-26S-D
Model HFS-15-100-100-D