Filter
Top Products
Date: 8-4-2010
Revision: 0
Form: 2396
the user to manually control the firing rate while
the boiler is firing. The third option can be
selected to change the rpm of the blower while
the boiler is off or in standby. The manual firing
rate can be changed by pressing the clear
button and entering the new value or by using
the up and down arrows. To accept the new
value press the ok button and the boiler will
change the firing rate to the new value. An error
message will display if the value entered
exceeds the maximum firing rate or falls below
the minimum firing rate.
Note:
The firing rate control should come from the
factory set to ‘Manual in Run’ with the manual
firing rate value set to the light off rpm.
2.2.15 ADVANCED SETUP
► 1234 SETUP ►ADVANCED SETUP
Figure 29 Advanced Setup
The advanced setup page displays many more
options that can be changed by the user.
2.2.16 SYSTEM TIME
► 1234 SETUP ► ADVANCED
SETUP ► DATE & TIME
Figure 30 System Time
Set the date and time by adjusting the
appropriate boxes using the up and down arrow
keys. Select the OK button when finished.
Note:
Currently the date and time will need to be reset
when a loss of power to the display occurs.
2.2.17 CALIBRATE TOUCH SCREEN
► 1234 SETUP ► ADVANCED
SETUP ► DIAGNOSTICS
Figure 31 Display Diagnostics
24
Occasionally the touch screen will need to be