Filter
Top Products
55
BUTTONHOLE AND BUTTON SEWING
OJALES Y COSTURA DE BOTONES
ASOLE E BOTTONI
Button Sewing
XL5300 XL5200 XL5100
Pattern Stitch Length Stitch Width Foot
PX300 PX200 PX100
332
Zigzag
Any
Button
Stitch Sewing Foot
1. Measure the distance between the holes and set the appropriate
stitch width with the stitch width dial. For example, if the distance
between the holes is 1.5 mm (1/16"), set the stitch width to “1.5”.
2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.
(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)
4. Place a button between the foot and the fabric and make sure that
the needle enters the holes without hitting the button. If it hits, see
step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
threads and tie the two threads at the back of the fabric.