Filter
Top Products
15
1
Stretch Stitching
Raise the needle to its highest position by turning the
handwheel toward you (counterclockwise) so that
the mark on the handwheel points directly up.
■ 35 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to “ ” or “ ”
changes the selected pattern to a stretch stitch.
■ 25 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to “ ” changes the
selected pattern to a stretch stitch.
Stitch Width Dial
Raise the needle to its highest position by turning the
handwheel toward you (counterclockwise) so that
the mark on the handwheel points directly up.
The numbers marked on the dial represent the stitch
width.
THE HIGHER THE NUMBER, THE WIDER THE
STITCH.
Note
● When the Straight or Triple Stretch Stitch is
selected, the needle position can be
changed from left to right by adjusting the
stitch width dial.
.
1 Stitch width dial
Reverse Sewing Lever
You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in
as far as possible and hold it in that position while
you lightly push the foot controller. To sew forward,
release the reverse sewing lever. The machine will
then sew forward.
1 Reverse sewing lever
1
1