Brother XL-3520i Sewing Machine User Manual


 
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————
10
3
Put a different presser foot on the needle plate
so that the bar on the presser foot is in line
with the slot on the shank.
4
Lower the presser foot lever and fix the
presser foot onto the shank. If the presser foot
is in the correct place, the bar should snap in.
1 Shank
Presser Foot Installation Orientation
Flat Bed Attachment
The accessories are stored in a compartment inside
the flat bed attachment.
1
Slide the flat bed attachment to the left to
open it.
1 Flat bed attachment
2 Storage compartment
Note
Put the accessories inside a bag, and then
store the bag inside the compartment. If the
accessories are not in a bag, they may fall
out and be lost or damaged.
Using a Free-arm Style
Free-arm sewing is convenient for sewing tubular
and hard-to-reach areas. To change your machine to
the free-arm style, lift out the flat bed attachment.
1
Slide the flat bed attachment to the left to
release it.
1 Flat bed attachment
If the presser foot is not installed with the
correct orientation, the needle may strike
the presser foot, which may bend or
break the needle and cause injury.
CAUTION
1
2
1