Filter
Top Products
78
MAINTENANCE
MANTENIMIENTO
▼
Stitch Length
Dial is set at no
feeding. ("0")
Needle is not
correctly inserted.
▼
▼
▼
▼
▼ ▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
Page 34
Page 9
Page 26
No
Page 14
No
Page 9
No No
Page 7
No
No
No
Page 9
No
Page 8
No
Page 34
No No
No
The combination
of needle size/
thread size/fabric
is incorrect.
Inferior needle
is used.
Thread is tangled.
Inferior needle is
used.
The combination
of needle size/
thread size/fabric
is incorrect.
Lint is clinging to
the bottom of the
needle plate.
FABRIC DOES
NOT FEED
PROPERLY
NEEDLE
BREAKS
MACHINE IS
NOISY OR SLOW
MACHINE DOES
NOT START
Power supply plug
is removed from
outlet.
▼
▼
Page 22
Main power switch
is turned off.
PERFORMANCE CHECK LIST
CONTACT YOUR LOCAL SERVICE CENTER
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.
Page 70
Page 8
No
▼
Page 17
Drop feed lever is
in down position.
The bobbin winder
shaft is slid to the
right.
Foot controller is
not used correctly.
▼
▼
Page 18, 36
No
Presser foot is not
lowered.
(PS-2500, PS-2400,
PS-2300, STAR140E,
STAR130E, STAR120E)
The buttonhole
lever is pushed
toward the back of
the machine.
No
▼
No
▼
Page 56