Filter
Top Products
19
Seam Guide
1 Tighten the screw securely with a
screwdriver since it might other-
wise loosen due to vibration.
1
Installation
Adjustment
To be able to adjust the position of
the foot towards the arrow.
Fabric Separator(for
joining lining to fabric)
✽ Use this technique for sewing
velvet and lining together.
1 Raise needle and foot.
2 Move separator so it sits under
presser foot.
3 Make sure it is lined up so that
the needle passes through the
slot of the separator without hit-
ting the plate itself.
4 Secure liner plate in place with
lining plate screws.
5 Set pressure of sewing feet and
feed position to pin feeding posi-
tion.
6 Pull thread until lower needle
catches fabric.
✽ Sew 2-3 reinforcement stitches.
7 When not using separator, it can
be swung off to the side as illus-
trated in drawing.
Fabric
Separator
Needle
Separator
Needle
Separator
Lining
Velvets
Note
• Lighten the presser foot pressure slightly when using the fabric separator.
• Use the separator to neatly sew 2 hard to manage fabrics together by keeping
them from interacting with one and other before the needle sews them to-
gether in a perfect seam.