Filter
Top Products
15
Basic Sewing (2)
Note Make sure power is off before changing feet.
Rolled Hem Foot
1 Attach rolled hem foot.
✽ Refer to page 13 for instructions
on changing sewing feet.
2 Insert needle approximately 0.5
cm from the edge of the fabric
and sew 2 stitches.
0.5 cm
0.5 cm
Rolled Hem
5 With your right hand, put the
edge of the rolled hem under the
presser foot, from the spot where
the threads come out. Insert the
edge so that it lies directly under
the needle. Lower the presser
foot.
6 Pull gently on threads in left hand
while sewing the first 3-4 stitches
to hold them in place.
7 Fold hem over about 0.5 cm and
continue feeding folded hem un-
der foot while sewing towards the
curved guide on the foot.
3 Turn the hand wheel towards you
to raise the needle, raise the
presser foot, then pull the fabric
forward.
4 Hold the 4 threads in your left
hand.