Filter
Top Products
CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and
Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble
Shooting
17
Quilting Foot
Reduce the foot presser and turn the
dial on the machine lowering the feed
dogs for free motion quilting.
Also the needle threader will not work
when this foot is in use.
Walking Foot
Forked part
of operation
lever
Secure the
capscrew
with a
screwdriver.
1
2
1 Insert the forked part of the op-
eration lever while raised in an
upright position onto the screw
as shown and then insert the
capscrew.
2 Tighten the screw securely with a
screwdriver. Tightening ad-
equately is important as the
screw might loosen due to the
foot and forked operation lever
vibration.
Note
• Do not press the pedal all the
way down.
Try to keep the sewing speed be-
low 70% of the maxinum speed.
• The cloth may not feed if you
sew at high speeds.
• The feed dog for feeding the
cloth may not move if the clamp-
ing pressure on the cloth is too
strong.
• It is not advisable or necessary
to use the Pin Feed mode with
the walking foot.