Filter
Top Products
9
ENGLISH
p
Install the needle plate cover and bobbin
cover with tabs.
For details on installing the needle plate cover,
refer to “Cleaning the Race” in the machine’s
Operation Manual.
a Needle plate cover
b Bobbin cover with tabs
q
Install the flat bed attachment or embroidery
unit.
→ This completes the upper and lower threading.
CAUTION
• When creating bobbin work, use the bobbin cover
with tabs, otherwise the thread may become
tangled or the needle may break.
Note
• When installing the needle plate cover, do not allow
it to pinch the thread.
Note
• When installing the flat bed attachment or
embroidery unit, do not allow it to pinch the thread.
• When the bobbin thread is replaced with a new one,
be sure to repeat the procedure from
a, otherwise
the lower threading will not be done correctly.
Note
• If utility stitches are to be used, refer to “CREATING
BOBBIN WORK (SEWING)” on page 10. If
embroidery patterns are to be used, refer to
“CREATING BOBBIN WORK (EMBROIDERY)” on
page 13.