Filter
Top Products
APPENDIX —————————————————————————————————————————————————————————
—
104
The fabric is
wrinkled.
The upper thread was not threaded
correctly, or the bobbin is incor-
rectly installed.
Correctly thread the upper thread
and correctly install the bobbin
thread.
page 16, 18
The spool is incorrectly installed. Correctly install the spool. page 18
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt. Replace the needle. page 31
If thin fabrics are being sewn, the
stitch is too coarse.
Shorten the stitch length or sew with
stabilizer material under the fabric.
page 52
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 50
Stitches are
skipped.
The upper thread was not threaded
correctly.
Correct the upper threading. page 18
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt. Replace the needle. page 31
The needle is incorrectly installed. Correctly install the needle. page 32
Dust has accumulated under the
needle plate or in the shuttle.
Remove the needle plate cover and
clean the shuttle.
page 100
A high-pitched
noise is made
while sewing.
Dust has accumulated in the feed
dogs or in the shuttle.
Clean the shuttle. page 100
The upper thread was not threaded
correctly.
Correct the upper threading. page 18
The shuttle is scratched, or has a
burr on it.
Replace the shuttle.
Contact your retailer or the nearest
authorized service center.
–
A bobbin designed specifically for
this machine is not used.
Incorrect bobbins will not work prop-
erly. Only use a bobbin designed spe-
cifically for this machine.
page 12
The thread does
not pass through
the eye of the
needle.
The needle was not raised.
The thread cassette indicator is lit in
red.
Press the needle position button. The
thread cassette indicator lights up in
green.
page 22
The needle is incorrectly installed. Correctly install the needle. page 32
The stitch is not
sewn correctly.
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 96
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 50
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 100
Symptom Probable Cause Remedy Reference
S2_brotherE.book Page 104 Thursday, February 13, 2003 11:03 AM