Filter
Top Products
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
35
KE-430F, BE-438F
(12) COUNTER indicator
Illuminates when the SELECT key (14) is pressed to switch to the lower thread or production counter setting.
(13) SPLIT No. indicator
Illuminates when the SELECT key (14) is pressed to show the split setting when split data (for specifying a pause while the
program is running) exists.
(14) SELECT key
Used to switch the menu display (pattern No., X-scale and Y-scale, sewing speed, work clamp/button clamp lift amount,
counter).
(15) PROGRAM No. display
This shows information such as program numbers.
(16) Menu display
Displays information such as menu setting values, memory switch settings and error codes.
(17) Setting keys
Used to change the value which is displayed in the PROGRAM No. display (15).
(18) Setting keys
Used to change the value which is displayed in the menu display (16).
(19) TENSION key
Used to switch to tension correction value display mode.
(20) TENSION indicator
Illuminates when in tension correction value display mode.
(21) SECTION No. display
Shows the section number when you select a pattern in which the upper thread tension changes while the pattern is being
sewn.
(22) TENSION display
Shows the upper thread tension value.
(23) Setting keys [+, -]
Used to change the value which is displayed in the SECTION No. display (21).
(24) Setting keys [ ]
Used to change the value which is displayed in the TENSION display (22).
(25) ENTER key
Used to accept the values which are displayed in places such as the menu display (16).
(26) Function keys [F1, F2, F3, F4]
Used to directly select program numbers and cycle program numbers.