Filter
Top Products
69
3
——
—————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
*Rfc.: Reinforcement **Select a stitch width of 5.0 mm (3/16 inch) or less.
Fagoting
Stitching across an open seam is called “fagoting”. It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or
a sheet of water-soluble stabilizer.
• If you draw a line down the middle of the
thin paper or water-soluble stabilizer,
sewing is easier.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “Selecting stitching”
(page 37).
f
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
g
After sewing is finished, remove the paper.
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse/
Reinforcement
Stitching
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto Manual Auto Manual
Decorative
stitch
N252525–
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
3.5
(1/8)
1.5-4.0
(1/16-3/16)
No No
*
Rfc.
N26262624
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
4.0
(3/16)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
N272727–
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
2.5
(3/32)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
N282828–
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
2.0
(1/16)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
CAUTION
1
2
3