Filter
Top Products
37
2
——
—————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Selecting stitching
Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
a
Turn on the sewing machine.
b
Press (stitch selection keys). The
number of the selected stitch is displayed.
Press the “+” or “–” side of to increase or
reduce the number by one. Pressing on the
right changes the digit on the right and pressing
on the left changes the digit on the left.
X The stitch is selected.
c
Attach the presser foot indicated in the LCD.
The display location of the presser foot type
differs depending on the model.
This manual shows, as an example, the LCD
(illustration above) of models where the presser
foot type appears above the number of the
selected stitch.
a Presser foot type
• For details, refer to
“Replacing the presser
foot” (page 33)
.
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
d
If necessary, adjust the stitch length and
width.
• For details on sewing with each of the utility
stitches, refer to the following example.