Filter
Top Products
7
5
Turn on the machine.
6
Using embroidery editing software provided
with the Link function, such as PE-DESIGN
NEXT, or later, will allow you to send the
embroidery pattern(s) to the machine in the
Link mode from your computer.
7
When the following message appears, touch
.
X A message appears in the machine’s LCD
while the machine is connecting to PC.
Note
● For details on using the embroidery editing
software, refer to the Instruction Manual
included with the software.
* This Link dialog box is found in PE-DESIGN
NEXT software.
● If the following error message appears, the
type of embroidery frame installed on the
machine is not compatible with the size of
the pattern. Replace the embroidery frame
with one compatible with the size of the
pattern.