Filter
Top Products
12
Two needles three threads cover stitch
Use three threads, two front needles and the looper
thread to sew a 6 mm (15/64 inch) or 3 mm (1/8 inch)
cover stitch.
Use: Ideal for hemming and for decorative stitching.
Needles and threading
• For details on installing and removing the needle,
refer to “Needle” on page 7.
1Left needle
2Right needle
IMPORTANT!!
Lightly tighten the screw at the unused needle
position, so it does not fall out while sewing.
• For details on threading the machine, refer to “III.
Threading” on page 9 to 10.
< Threading the left and right needle >
< Threading the looper >
6 mm (15/64 inch) (Wide)
3 mm (1/8 inch) (Narrow)
1 2
A
3 4
A
Needles and threading
• For details on installing and removing the needle,
refer to “Needle” on page 7.
3Left needle
4Center needle
IMPORTANT!!
Lightly tighten the screw at the unused needle
position, so it does not fall out while sewing.
• For details on threading the machine, refer to “III.
Threading” on page 9 to 10.
< Threading the left and center needle >
< Threading the looper >