Filter
Top Products
8
II. Preparation before threading
4
1
2
3
Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above
the spool pins as illustrated left.
1Thread holder on thread tree
2Spool pin
3Spool cushion
4Correct position
Thread spool
The procedure for placing the spool of thread on the spool pin differs according to the shape of the spool.
3
If you are sewing with loosely
spun nylon thread, we recom-
mend that you cover the spool
with the net supplied to prevent
the thread from slipping off the
spool.
Adapt the net to the shape of the
spool.
1Spool support
2Spool cushion
3Net
1Spool support
2Spool mat
3Spool cap
Type A Type B
Thread tree
1
2
1
2
3
(1)
(2)
(1)Turn off the main power switch for safety.
Needle position
(2)Set the needle bar in its highest position by turning the
handwheel toward you.
Turn the handwheel to find the easiest position for
threading.