Foot 3
¼” Foot
XA7258-001
Standard PQ sewing foot for quilting seams
Machine Set-Up:
Feed dogs up using one of the three settings based
on fabric and whether the pin feed is used. Adjust
other setting to match fabric used.
Materials Needed for Samples:
Quilting cotton, thin batting
General Sewing Directions:
Use the right side of the foot guided along the right fabric edge to create a ¼” seam. Use the left edge to
guide along a seam to top stitch 1/8” away from the seam.
Specific ULT Sample Directions:
Feed
Dogs
Presser
Foot Dial
Thread
Tension
Stitch
Length
Midweight +/- 4 2.5
The sample is made of 2” squares sewn together with ¼” seams, sandwiched with batting/backing and
quilted with 1/8” seams within the squares. Trim sample to fit.
Brother PQ-Accessories Workbook July 2003 61