Filter
Top Products
Brother PQ-Accessories Workbook July 2003 76
Foot 18
Feltscaper
SA180S
Optional PQ foot accessory used for making felted
projects.
Machine Set-Up:
Place feed dogs in down position before you install
the Feltscaper. Make sure the machine is turned
off before you install this accessory. The felting
needles are very sharp. Follow the installation
setup that comes with the accessory to ensure that
the felting needles clear the sides of the needle
felting foot and adjust the height to clear your
materials.
Materials Needed for Sample:
Wool tweed, roving, wool needlepoint wool
General Sewing Directions:
Guide the work under the foot at a steady speed and movement. Arrange the roving/wool thread and
anchor it with the needles. You may want to turn off the needle down button to make it easier to move
from place to place. Adjust the Feltscaper “foot” level as you add more levels of yarn if your project
doesn’t move easily under the unit. Empty the lint box frequently as you work. Keep your fingers away
from the foot.
Specific ULT Sample Directions:
The sample used multi-color roving twisted in loops and anchored with the Feltscaper. Form other loops
with 100 per cent wool needlepoint Persian yarn and anchor with the needles. Form a bow with the yarn
and tack it down.