Filter
Top Products
operating instruCtions
Before lighting and using your appliance, check all connections for leaks
using a mild soapy water solution. DO NOT USE MATCHES! Testing for
leaks should start at the gas cylinder working back to your appliance.
Leak TesT Procedure
1. Turn OFF the propane supply at the cylinder. Turn OFF all appliance
burner controls.
2. With the appliance controls in the OFF position, turn propane cylinder
valve ON. This pressurizes all lines to appliance(s). Wait 3 seconds then
CLOSE cylinder valve. The grill gauge now monitors pressure between
the cylinder and appliance. Any leaks in the lines between the cylinder
and appliance will be indicated by the window color changing from
green to red within 45 seconds. On some propane systems, the color
will change over a longer period of time.
8