12
helPfUl hInTs foR cleanInG The fIlTeR
Do not bend the collection plates in the FILTER to fit them in the
dishwasher rack. The unit will not function properly if the collection plates
have been bent and touch each other.
If you find that the collection plates in the FILTER are not completely clean
after one dishwasher cycle, increase the wash cycle time or wash them a
second time.
It is safe to use standard dishwasher soap.
If hand washing, rinse the FILTER’s collection plates in your sink to remove
loose debris. Submerge the entire FILTER in warm, soapy water and allow
it to soak for 15 minutes. Rinse with cold water.
You may use a small scrub brush to clean in between the collection plates,
but take care not to bend them.
If you do not allow the FILTER to completely dry, you may hear a crackling noise
during use. If this occurs, remove the FILTER and dry it completely before use.
•
•
•
•
•
•