Filter
Top Products
10
ADJUSTING THE CONTROL PANEL BRIGHTNESS
The control panel has four brightness levels: High, Medium, Low and Off.
To adjust the brightness level, press and hold the POWER button (when the
unit is powered on) for 3 seconds. The control panel will cycle through
the four brightness levels.
Release the POWER button when the control panel displays your desired
brightness level.
Note: If the brightness level is set to Medium, Low or Off, when any button
is pressed, the brightness level will default to High for 5 seconds.
CLEAN FILTER WARNING
The POWER button backlight will flash to alert you that pollutants and particles
have collected on the FILTER’s stainless-steel collection plates. If you see visible
debris built up on the stainless-steel collection plates, please wash the FILTER.
The unit continues to clean the air when the POWER button backlight
is flashing.
1.
2.
3.
•
•