Filter
Top Products
Page 6 DPSBSS
Igniter Assembly
Attach one end of the igniter wire (5) to the open terminal
on the back of the electronic igniter.
Install AA Alkaline battery
SIDE BURNER ASSEMBLY
Instructions
All Broilmaster
®
side burners require some assembly
and installation. Certain instructions may not apply
to your model of side burner. This side burner requires
the same gas type (natural or liquid propane) as your
Broilmaster
®
gas grill. Your side burner is factory
equipped for LP gas. Natural gas conversion
instructions are located in the Natural Gas section of
this manual.
Please locate and follow in listed order only the
instructions for assembly and installation of the
correct gas type. Skip any sections that do not pertain
to the side burner model you have purchased.
PreAssembly
Every assembly and installation instruction includes
detailed illustrations to aid in assembly.
Compare the materials found in the shipping container
to the parts list provided. Every effort has been made
to ensure the correct parts have been provided. In
the event of an error, please contact your local
Broilmaster
®
dealer regarding the replacement of
missing parts.
The following items are needed for the assembly of
your side burner:
Phillips screwdriver
Two adjustable wrenches
Soapy water solution (to test for leaks)
Grill Pull Handle
Attach the pull handle to the right side of the grill as
illustrated in Figure 1. Place two bolts into holes in
pull handle and through holes on right sides of grill
bottom. Fasten each bolt with a washer, lock washer
and nut.
Positioning Side Burner
Slide side burner right side up onto right grill pull handle.
Attach with one 1/4-20 x 3/4 screw (17). FIGURE 3.
FIGURE 3
F
IGURE 2
-
+
Burner (21)
Electronic
Igniter (8)
AA Alkaline
Battery
Igniter Wire (5)
17
FIGURE 1