Filter
Top Products
45
MISCELLANEOUS
STUB SHAFT AND ALIGNMENT PIN COMBINATIONS**
STANDARD LENGTH 4.750 STUB SHAFT
STANDARD VANGUARD™ V-TWIN
Model No.
Currently (old stub shaft)
Stub Shaft Kit
Service P/N
Stub Shaft P/N
(not sold
separately)
Alignment
Pin P/N
Comments
2904, 2944, 3034, 3044(GF) 807867 262949 690740
3504, 3544(GF), 3804, 3814, 3844(GF) 807867 262949* none No alignment pin used because it
will not allow stub shaft to seat on
ywheel properly.
Replacing 262949 & 805613 when available (new stub shaft)
2904, 2944, 3034, 3044(GF) 841580 841244* 841581 This combination must be used
together. This set up insures
better alignment than the ol
stub shaft and alignment pin
listed above.
3504, 3544(GF), 3804, 3814, 3844(GF) 841580 841244* none No alignment pin because it will
not allow stub shaft to seat on
ywheel properly.
COOLER CLEANER VANGUARD™ V-TWIN
Currently (old stub shaft)
2954, 3054, 3094(GF) 807867
262949* 690740
3564, 3594(G), 3854, 3864, 3894(GF) 807867 262949* 690740 Cooler cleaner ywheel mountin
boss was eliminated therefore
alignment pin needed.
Replacing 262949 & 805613 when available (new stub shaft)
2954, 3054, 3094(GF) 841580 841244* 841581 This combination gives better
alignment than old set up.
3564, 3594(GF), 3854, 3864, 3894(GF) 841580 841244* 841581 This combination gives better
alignment than old set up.
LONGER STUB SHAFT 5.439 INCHES LONG - CURRENTLY NOW AVAILABLE
(Primarily used on 35/38 cooler cleaner due to deeper blower housing)
COOLER CLEANER VANGUARD™ V-TWIN
Model No.
Stub Shaft Kit
Service P/N
Stub Shaft P/N
(not sold
separately)
Alignment
Pin P/N
Comments
3564, 3594(GF), 3854, 3864, 3894(GF) 842655 809762* 841581 Longer stub shaft
*Available as kit only
**As of 8-9-05