Filter
Top Products
11
OPERATION
Stopping the Water Pump
1. Move engine speed lever to “Slow” ( ) position
(Figure 10).
2. Push on/off switch to “Off” position (Figure 10).
3. Turn white fuel valve to “Off” position (Figure 9).
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump (Figure 12).
3. Remove plug from top of pump and flush internal
components of pump with clean water (Figure 13).
4. Replace both plugs and twist.
Figure 12 — Remove Drain Plug
Figure 13 — Remove Plug from Top of Pump and Flush
• DO NOT stop engine by moving choke lever to “Choke”
position.
Backfire, fire or engine damage could occur.
CAUTION