Briggs & Stratton 073001 Plumbing Product User Manual


 
MAINTENANCE
17
General Recommendations
Regular maintenance will improve the performance and
extend the life of the water pump. See any authorized
Briggs & Stratton dealer for service.
The water pump’s warranty does not cover items that have
been subjected to operator abuse or negligence.To receive
full value from the warranty, the operator must maintain
water pump as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your water pump.
All service and adjustments should be made at least once
each season. Follow the requirements in the “Maintenance
Schedule” chart above.
NOTE: Once a year you should clean or replace the spark
plug and replace the air filter.A new spark plug and clean
air filter assure proper fuel-air mixture and help your
engine run better and last longer.
Emissions Control
Maintenance, replacement or repair of the emissions control
devices and systems may be performed by any non-road
engine repair establishment or individual. See emissions
control system warranty, elsewhere in this manual.
Maintenance
Maintenance consists of keeping the water pump clean.
Store the unit in a clean dry environment where it will not
be exposed to excessive dust, dirt, moisture or any
corrosive vapors. Cooling air slots in the water pumps
engine must not become clogged with dirt, leaves or any
other foreign material.
NOTE: DO NOT use a garden hose to clean water pumps
engine.Water can enter engine fuel system and cause
problems.
Cleaning
Daily or before use, look around and underneath water
pump for signs of oil or fuel leaks. Clean accumulated debris
from inside and outside water pump. Keep linkage, spring and
other engine controls clean. Keep area around and behind
muffler free from any combustible debris.
Engine parts should be kept clean to reduce the risk of
overheating and ignition of accumulated debris.
Use a damp cloth to wipe exterior surfaces clean.
Use a soft bristle brush to loosen caked on dirt or oil.
Use a vacuum cleaner to pick up loose dirt and debris.
MAINTENANCE SCHEDULE
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
¹ Change oil after the first (5) operating hours and every 50 hours or every year,whichever occurs first,thereafter.
Change oil sooner when operating under dirty or dusty conditions.
² Replace more often under dirty or dusty conditions.
MAINTENANCE SCHEDULE
FILL IN DATES AS YOU COMPLETE
REGULAR SERVICE
SERVICE DATES
SERVICE DATES
MAINTENANCE TASK
Before
Each Use
Every 25 Hours
or Yearly
Every 50 Hours
or Yearly
Every 100 Hours
or Yearly
Clean debris
X
Check oil level
X
Change engine oil
Service air cleaner
Service spark plug
X
Service spark arrester
X
Clean cooling system
Prepare for storage If unit is to remain idle for longer than 30 days.