Filter
Top Products
Express
®
Crescent
®
Lavatory System - CRS-Series
Installation Instructions CRS-2/IR, CRS-3/IR
9
Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07
Installation Instructions continued . . .
Step 9: Install the Optional Soap Dispenser
For Express® Crescent® Lavatory System units with optional soap dispensers, see 215-1583.
Step 10: Install the top cover
1. Carefully place the top cover on top of the lavatory system bowl.
2. Install the threaded rods into the holes on the bottom of the top cover (see Figure 3 on page 5).
3. Slide the anchor plate onto the threaded rods and secure anchor plate against bowl using the
wing nuts provided.
4. OPTIONAL SOAP DISPENSER: Install soap filler assembly in mounting bracket previously
installed. Tighten the optional soap filler cap nut with a spanner wrench.