Filter
Top Products
Leak Sensor Installation
-47-
Position the Leak Sensor
Step 15: Put the Leak Sensor back in position against the water heater jacket and position to the pre-
drilled hole, as shown in Figure 66.
Mount the Leak Sensor
Step 16: Using (1) of the included Philips head screws, screw the Leak Sensor to the water heater jacket.
This is shown in Figure 67.
Figure 66
Figure 67
Leak Sensor
Leak Sensor
Wire Harness
Water Heater
Jacket
Leak Sensor
Philips Head
Screw
Philips head
screwdriver
Leak Sensor
Wire Harness