Filter
Top Products
7. Remove element(s) from tank using 1½" deep
well socket or wrench. Unscrew element(s)
counter-clockwise to remove from tank.
Unscrew element(s)
counter-clockwise to
remove from tank
Element(s) Installation:
8. Check element terminal block for proper
electrical rating.
Note: Some elements have a dual rating, so be
sure to check all surfaces on element terminal
block.
Check rating(s)
on element
Page 4 of 5
6. Disconnect wire leads from element(s)
terminal block.
Disconnect wire
leads from
element terminal
block
Element
terminal block