Filter
Top Products
4 en | Safety WZ16 Integrated IR Bullet Camera
1 Safety
1.1 Safety Precautions
DANGER!
High risk: This symbol indicates an imminentlyhazardous situation such as “Dangerous
Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.
1.2 Important Safety Instructions
Read, follow, and retain all of the following safety instructions. Heed all warnings on the
unit and in the operating instructions before operating the unit.
1. Read these instructions.
2. Keep this instruction.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a clean, soft, dry or moistened cloth and mild detergent solution.
7. Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including ampliers) that produce heat.
9. Do not put objects inside the camera. Make sure that no metal objects or
ammable substances enter the camera. This may cause re, short-circuits and other
damages.
10. Be careful when handling the camera. To prevent damage, do not drop the camera
or subject it to strong shock or vibration.
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the power where they exit from the apparatus.
13. Protect the camera from humidity and dust.
14. Unplug this apparatus during lightning storms or when unused for long periods of
time.
15. Use only attachments/accessories specied by the manufacturer.
16. Use only with the bracket sold with the apparatus.
17. Do not attempt to open or disassemble the camera to gain access to the internal
components. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in a way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, does
not operate normally, or has dropped. When servicing, power shall be disconnected.
| 1.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.