Filter
Top Products
6 en | Installation Overview IP200 MiniDome In-Ceiling Mount
AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems
3 Installation Overview
The IP200 MiniDome camera comes with the hardware and
installation instructions necessary to mount the camera to a
concrete ceiling.
This following mounting accessory is available :
– In-ceiling mount, used in applications where the camera is
mounted into a recessed ceiling.
The mount is supplied with two different trim rings and
different tooling hole positions on the sides of the recess
mount. Use the table below to choose the ring and hole
position for your camera.
The installation should be made by qualified installation
personnel and conform to the National Electrical Code and
applicable local codes.
Trim ring Hole Camera
Ring A A NDN-265-PIO
Ring B B NDC-225-P
NDC-225-PI
NDC-255-P
NDC-265-P