Filter
Top Products
14 en | Connection IP200 MiniDome In-Ceiling Mount
AM18-Q0626 | v1.0 | 2012.09 Installation Manual Bosch Security Systems
5 Connection
After the camera is mounted, connect the network cable and
the power cable.
Please refer to the IP200 Minidome series User Manual for
further instructions on camera connections and configuration.
CAUTION!
Do not connect power to the camera until all other connections
are made.
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
CAUTION!
To prevent humidity problems, the camera must be installed in
dry conditions, and the cable leads should be sealed once
connected.