Filter
Top Products
26 en | Configuration Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
Selecting an area for VMD masking
To set-up an area for VMD masking, access the area menu by
selecting the VMD Area option from the VMD menu. Upon
entering the Area menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There is one programmable VMD area.
Note:
When VMD is enabled, normal light fluctuations or
environmental factors can contribute to false-positive alarms.
Because of this, it is recommended to not connect the VMD-
triggered alarm output of the camera to a monitored alarm
system, as the false-positive alarms may be considered a
nuisance.
VMD
sensitivity
Sets the sensitivity for motion to the
desired level. The longer the white bar,
the more motion is required to acitvate
the VMD alarm. Motion above this level
activates alarm.
OSD alarm
text
Alphanumeric Text for on-screen display alarm (16
characters maximum).
EXIT Returns to main menu.
Item Selection Description