Filter
Top Products
Dinion Day/Night Camera Connections | en 13
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
3 Connections
3.1 Power connection
3.1.1 Low voltage cameras
Figure 3.1 Low voltage power connection
Connect power from a 24 VAC or 12 VDC class 2 power supply
as follows:
– Use AWG16 to 22 stranded wire or AWG16 to 26 solid
wire; cut back 5 mm (0.2 in) of insulation.
– Push in the tabs and insert the wires.
Note
These connections are not polarity sensitive.
CAUTION!
Before proceeding, disconnect the power from the power
supply cable. Ensure that the voltage of the unit matches the
voltage and type of the power supply being used.
VIDEO
12 VDC
24 VAC
ALARM
10 mm