Filter
Top Products
D9000,G & GV2 Series | Owner's Manual Supplement
6 Bosch Security Systems | 5/05 | 33267F
5.0 Passcode
Follows Scope
5.1 Description
The Passcode Follows Scope feature is an optional arming and disarming
restriction that can be enabled on keypads with access to multiple areas.
When this feature is set to No, the keypad restricts Passcode Arming and
Passcode Disarming to the home area of the keypad. When set to Yes, this
feature allows users to arm or disarm all the areas that they and the
keypad have access to. This feature causes no restrictions to the keypad
scope as it pertains to any other command or arming method other than
Passcode Arming or Passcode Disarming.
I have this feature.
I do not have this feature.
5.2 Using Passcode Follows Scope
Arming from a keypad with Panel Wide scope and Passcode Follows
Scope enabled:
1. Ensure the keypad shows idle disarmed text.
2. Ensure you have a valid pass code with the authority to Passcode
Arm in all areas.
3. Enter your code by pressing the [passcode digits] followed by the
[ENTER] key.
4. The keypad shows ARMING: 12345678, to indicate which areas
are about to enter exit delay and arm.
5. The keypad shows the exit delay count down.
6. Exit the premises.