Filter
Top Products
D9000,G & GV2 Series | Owner's Manual Supplement
14 Bosch Security Systems | 5/05 | 33267F
10.4 Unlock Door?
1. To unlock a door to allow free access, at the CYCLE DOOR?
prompt, press [NEXT] to enter the UNLOCK DOOR? subfunction.
The display shows UNLOCK 1 2 3 4 5 6 7 8 if all doors are
in a normal state and available. If a door is not in a normal state,
the number of the door is replaced with a symbol indicated in
Table 1.
2. Enter the number of the door to unlock then press [ENT]. This
door unlocks and the display changes to reflect the new status of
the doors.
For example, if you wanted to unlock Door 4, at the following
prompt:
UNLOCK DOOR 1 2 3 4 5 6 7 8
press [4] then [ENT]. The display shows:
UNLOCK DOOR 1 2 3 U 5 6 7 8
This indicates that all doors are in a normal state, except for Door
4, which is unlocked.
4. Press [ESC] to leave this subfunction, or enter another door
number to unlock.
10.5 Secure Door?
1. To secure a door to prohibit access to users regardless of their
access authority level, at the CYCLE DOOR? prompt, press
[PREV] to enter the SECURE DOOR? subfunction.
The display shows SECURE 1 2 3 4 5 6 7 8 if all doors are
in a normal state and available. If a door is not in a normal state,
the number of the door is replaced with a symbol indicated in
Table 1 on page 12.
2. Enter the number of the door to secure then press [ENT]. This
door secures, and the display changes to reflect the new status of
the doors.
For example, to secure Door 5, at the following prompt:
SECURE DOOR 1 2 3 4 5 6 7 8
Press [5] then [ENT]. The display shows:
SECURE DOOR 1 2 3 4 X 6 7 8