Filter
Top Products
D9000,G & GV2 Series | Owner's Manual Supplement
16 Bosch Security Systems | 5/05 | 33267F
You can use the Function List in place of steps 2 and 3 to start
this function.
1. Press the [MENU] key to enter the Function List.
2. Press [NEXT] repeatedly until you reach the DEL USER?
prompt.
3. Press [ENT].
4. The display shows DEL USER #. Enter the user number and press
[ENT].
5. USER ## (or user text, such as the name of the user, if this feature
was programmed into your system by your security company)
appears allowing for confirmation. Press [ENT]. If this is not the
user you wish to delete, press the [NEXT] or [PREV] key until the
correct user name appears, then press [ENT].
6. The display shows DELETE USER ##? Press [ENT] to delete user,
and USER DELETED appears. If the user number is not in the
system, NOT IN USE appears. If you made an error and do not
wish to delete this user, press [ESC].