Filter
Top Products
Relay Unit Installation | en 13
Bosch Security Systems User Manual F.01U.278.516 | V1.0 | 2012.11
3 Installation
3.1 Unpacking
The Relay Unit is carefully packed for transportation.
The components contained in the box are protected, but should be handled with care.
Store the packaging material for further use (storage or transport).
1. Take all components out of the box and place the Relay Unit on the working space.
2. Check each component in the box, in accordance with the list of contents below.
3. Check that the Relay Unit and its accessories have not been damaged during
transportation.
In case of defective or missing equipment, do not try to install the Relay Unit.
Contact immediately your local representative.
3.1.1 List of contents
Description
Relay Unit
Power supply adaptor (US) 115VAC/10VAC
Antenna 434MHz 1/2 L=13.4 in (34 cm) FME
Straight adapter BFME-TNC
Right angled bended adapter BFME-ETNC
6.6 ft (2 m) Cable FCC 6/4
Relay Unit User Manual