Filter
Top Products
D9000,G & GV2 Series | Owner's Manual Supplement
Bosch Security Systems | 5/05 | 33267F 7
Arming from a keypad with Panel Wide scope and Passcode Follows
Scope disabled (default):
1. Ensure the keypad shows idle disarmed text.
2. Ensure you have a valid pass code with the authority to Passcode
Arm in all areas.
3. Enter your code by pressing the [passcode digits] followed by the
[ENTER] key.
4. The keypad shows the exit delay count down.
5. Exit the premises.
6.0 Passcode-Controlled Menu
6.1 Description
When enabled, the system prompts users to enter a passcode before
viewing the keypad function list menu. The system shows the user the
menu options allowed according to their authority level; thereby,
providing users only the commands and functions pertinent to them.
Configure this feature according to the guidelines specified in the
D9412GV2/D7412GV2 Program Entry Guide (P/N: F01U003636).
I have this feature.
I do not have this feature.
6.2 Using Passcode Controlled Menus
On a D1255 keypad with the Passcode Controlled Menu enabled:
1. Press the [ESC] key. The keypad responds with the ENTER
PASSCODE display.
2. Enter your code by pressing the [passcode digits] followed by the
[ENT] key. The first menu item that you have authority to use
appears.