Filter
Top Products
D9000,G & GV2 Series | Owner's Manual Supplement
Bosch Security Systems | 5/05 | 33267F 11
9.2 Using ACCESS LEVEL CTL?
1. Ensure the display shows idle disarmed text.
2. Press the [MENU] key to enter the Function List, then press
[NEXT] repeatedly until you reach the CHANGE LEVEL
CTL? prompt. Press [ENT].
3. ACCESS LEVEL CTL appears indicating that you are affecting
the authority levels of cards or tokens and not passcodes. Press
[ENT].
4. ENTER LEVEL: appears. Enter the access authority level number
and press [ENT].
5. If the access level is currently disabled, LEVEL # ENABLE?
appears. If the access level is currently enabled, LEVEL #
DISABLE? appears. Press [ENT] to accept the choice. ENTER
LEVEL: appears again. Press [ESC].