Filter
Top Products
4
Assembly
This model may be supplied with some of the following accessories:
• An accessory caddy for storing your accessories.
• A crevice tool (10) for confined spaces.
• Brush tool (11) for furniture and stairs.
Attaching the accessory caddy
(Figure A)
• Place the edge of the charger base (8) on to
the edge of the accessory caddy (9).
• Insert the brush tool (11) into the front of the
crevice tool (10) then push the crevice tool into
the accessory caddy.
Attaching the accessories (Figure B)
• Insert the crevice tool (10) into the front of the
appliance.
Make sure that it is pushed fully in. If the brush
tool (11) is required then insert the brush tool
(11) into the front of the crevice tool (10).
Product Features
1. On/Off button
2. Handle
3. Handle reset button
4. Nozzle
5. Charging indicator
6. Dust collector cover
7. Cover release button
8. Charging base
9. Accessory caddy
10. Crevice tool
11. Brush tool
A
B