Filter
Top Products
9
ENGLISH
(Original instructions)
x
The charger automatically shuts off if the ambi-
ent temperature becomes too high. As a con-
sequence the charger will be inoperable. The
charging base must be disconnected from the
mains supply and taken to an authorised service
centre for repair.
$
The charging base is intended for indoor use
only.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Dust bowl
4. Charger
5. Charging bracket
Fig. A
6. Dry pick up cloth lter (NV2410N, NV2420N, NV3610N, NV3620N, NV4820N &
NV4820CN Only)
7. Pre-lter (NV2410N, NV2420N, NV3610N, NV3620N, NV4820N & NV4820CN
Only)
8. Wet/Dry foam insert (NW3620N & NW4820N Only)
9. Wet/Dry deector (NW3620N & NW4820N Only)
Fig. B
10. Squeegee (NW3620N & NW4820N Only)
11. Brush tool (NV2420N, NV3620N, NV4820N & NV4820CN Only)
12. Crevice tool (NV2420N, NV3620N, NV4820N & NV4820CN Only)
Note: The accessories can be stored by tting them into the front of the appliance. For
models that are supplied with both a brush and a crevice tool, rst t the brush into the
front of the appliance then t the crevice tool into the brush for storage.
Installation
Wall Mounting (g. C)
The product can be attached to a wall to provide a convenient storage and charging
point for the appliance.
When xing to a wall, make sure that the xing method is suitable for the wall type and
is appropriate to the weight of the appliance.
u Mark the location of the screw holes (within reach of an electrical outlet for charging
the vac while it is on the wall bracket).
u Fix the mounting bracket to the wall using appropriate scres and plugs for the type
of wall and weight of the appliance.
u Hang the appliance on the wall by placing the opening on the base of the vac over
the hooks in the wall mount charging bracket.