Black & Decker BD200MTBR Vacuum Cleaner User Manual


  Open as PDF
of 44
 
10
Troubleshooting
Problem Possible Cause Possible Solution
•Unitwillnotstart. •Cordnotpluggedin. •Plugtoolintoan
working outlet.
 •Circuitfuseisblown. •Replacecircuitfuse.(If
the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
 •Circuitbreakeristripped. •Resetcircuitbreaker.
(If the product
repeatedly causes the
circuit breaker to trip,
discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
 •Cordorswitchisdamaged. •Havecordorswitch
replaced at a Black &
Decker service center or
authorized servicer.)
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are listed on page 12 and 13 and
are available from your local dealer or authorized service center. In addition to Black &
Decker
®
accessories, your oscillating tool will also accept Porter Cable
®
and Stanley
FatMax
®
oscillating tool accessories. If you need assistance regarding accessories,
please call: 1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
“Tools—Electric” or call: 1-800-544-6986 or visit www.blackanddecker.com
 previous next